The Laurel BOX is a wall-mount / bulkhead enclosure which provides environmental protection to IP65 / NEMA-4X for an 1/8 DIN instrument. It comes with a 1/8 DIN (45 x 92 mm)
panel and accommodated instruments up to 134.5 mm (5.30″) deep including connectors. This includes all 1/8 DIN instruments by Laurel Electronics and most 1/8 DIN instruments
by other manufacturers.
The BOX has an instrument compartment that is sealed on all sides. The two clamshell halves of the case are joined by an O-ring. The rear mounting holes are outside of the sealed
compartment. Captive stainless steel screws and high-impact polycarbonate provide durability.
The panel cutout can be expanded by the user up to 150 x 71 mm (5.90″ x 2.80″) or 131 mm x 110 mm (5.16″ x 4.33″) to accommodate instruments larger than 1/8 DIN. Internal molded
standoffs with a height of 6.5 mm (0.25″) can be snipped off by the user if required.
Cable feedthroughs are via three sealed cable glands at the bottom of the case. These make a tight seal with round cables from 6.1 to 1.00 mm (0.04″ to 0.24″) in diameter. Note that
these feedthroughs are not compatible with off the shelf cables with molded connectors, such as USB cables.
The Laurel BOX may be ordered with the IPC splash proof cover. The combination of Models BOX and IPC will provide IP65 / NEMA-4X protection to 1/8 DIN instruments regardless of
manufacturer, provided that the instrument depth is less than 134.5 mm (5.30″).
