The Emerson RSTi Slice Power Modules reduce wiring and simplify installation. Modules that
support Smart Module ID will require one of the addresses on the bus.
The ST-7241 and ST-7641 enable multiple voltages to be supported on the RSTi bus such as 120 VAC.
All modules to the right of the module will be based on the supply voltage of the ST-7×41.
The ST-7111 and ST-7511 boost the 5 VDC on the backplane bus when module power requirement is exceeded.
The ST-7×11 supplies 1.0 Amps of 5 VDC to the modules to the right of the ST-7×11.
