The Amprobe ACD-10 PLUS is a 600 A clamp meter. Featuring jaws thinner than standard clamp meters, this
Amprobe clamp meter is able to access tight measurement areas while still accommodating conductors up to
25 mm. The ACD-10 PLUS provides a full range of measurements and is a very versatile clamp-style multimeter.
The Amprobe ACD-10 PLUS clamp meter accurately measures AC & DC voltage to 600V, AC current to 600A, resistance
to 40MΩ, capacitance to 3000 µF, and frequency. Frequency is measured by either jaws or test leads. Measurement
values are easily viewed on the ACD-10 PLUS’s 3-3/4 digit LCD display. Other features of the Amprobe ACD-10
PLUS include auto ranging, a continuity buzzer, relative zero mode, hold and maximum reading functions.
The Amprobe ACD-10 PLUS clamp multimeter ships complete with:
| Feature | Range | Accuracy |
|---|---|---|
| DC Voltage | ||
| 400.0 mV 4.000, 40.00, 400.0 V 600 V NMRR: CMRR: Input Impedance Transient protection: |
±(0.03% + 4 dgt) ±(0.5% + 3 dgt) ±(1.0% + 4 dgt) >50 dB@DC, 50/60 Hz >120 dB@DC, 50/60 Hz, Rs=1 kHz 10 MΩ, 30 pF nominal (1000 MΩ for 400.0 mV range) 6.5 kV (1.2/50 µs surge) |
|
| AC Voltage (50 Hz ~ 500 Hz) | ||
| 4.000, 40.00, 400.0 V 600 V CMRR: Maximum crest factor: Input impedance: Transient protection: ACD-10 PLUS: |
±(1.5% + 5 dgt) ±(2.0% + 5 dgt) >60 dB @ DC to 60 Hz, Rs=1 kΩ less than 1.75:1 at full scale & less than 3.5:1 at half scale 10 MΩ, 30 pF nominal 6.5 kV (1.2/50 µs surge) Average sensing |
|
| AC Current | ||
| 40.00, 400.0, 600 A Overload proctections: ACD-10 PLUS |
±(1.5% + 8 dgt)1,2,3 ACA Clamp-on jaws:600 A rms continuous Average sensing |
|
| 1) Max induced error from adjacent current carrying conductor: 0.05 A 2) Specified accuracy is from 1% to 100% of range and for measurements made at the jaw center. When the conductor is not positioned at the jaw center, position errors introduced are: Add 2% to specified accuracy for measurements made BEYOND jaw marking lines (toward jaw opening). 3) Add 8 digits to specified accuracy @ reading < 10% of range. |
||
| Resistance | ||
| 400.0 Ω 4.000, 40.00, 400.0 kΩ 4.000 MΩ 40.00 MΩ Open circuit voltage: Transient protection: |
±(0.8% + 8 dgt) ±(0.6% + 4 dgt) ±(1.0% + 4 dgt) ±(2.0% + 4 dgt) 0.4 VDC typical 6.5 kV (1.2/50 µs surge) |
|
| Frequency | ||
| 400.0 mVac 4.000 Vac 4.000, 40.00 Vac 400.0 Vac 600 Vac 400.0 Aac |
0 Hz ~ 2 kHz 5 Hz ~ 5 kHz 5 Hz ~ 100 kHz 5 Hz ~ 10 kHz 5 Hz ~ 5 kHz 40 Hz ~ 400 Hz |
±(0.5% + 4 dgt) ±(0.5% + 4 dgt) ±(0.5% + 4 dgt) ±(0.5% + 4 dgt) ±(0.5% + 4 dgt) ±(0.5% + 4 dgt) |
| Display counts: | 5000 | |
| Resolution: | 0.001 Hz | |
| Overload protection: | ACA Clamp-on jaws: AC 600 A rms continuous | |
| Transient protection: | VAC input jacks: 6.5 kV (1.2/50 µs surge) | |
| Capacitance | ||
| Range1 | Accuracy2,3 | |
| 500.0 nF, 5.000 µF 50.00 µF, 500.0 µF, 3000 µF |
±(3.5% + 6 dgt) | |
| 1) Additional 50.00 nF range accuracy is not specified 2) Accuracies with film capacitor or better 3) Specified with battery voltage above 2.8 V (approx. half full battery.) Accuracy decreases gradually to 12% at low battery warning voltage of approximately 2.4 V |
||
| Transient protection: | 6.5 kV (1.2/50 µs surge) | |
| Audible continuity tester | ||
| Audible indication: | between 10 Ω and 120 Ω | |
| Transient protection: | 6.5 kV (1.2/50 µs surge) | |
| Max hold* (where applicable) Specified accuracy ± 50 digits for changes > 25 ms in duration |
||
